Catalog - One Source (PF14434) - Flipbook - Page 313
Hydraulic Tools
Oil Test Kit
1/4"-12 Point Socket
Part Number - 363515
Tests hydraulic and motor oil. Mail oil samples
in for content test results. Comes with
container for oil, mailing container and labels.
Part Number - 104885
For disassembly and reassembly of
J.S. Barnes pumps and Charlyn torque
generators.
Test Kit Accessories
Suction Pump
Part Number - 363515-001
Hose Pulling Tool
Tubing, 100 Feet
Part Number - 363515-002
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Accumulator Charging Tool
Part Number - 103623-004
For charging and testing bladder and
diaphragm type nitrogen charged
accumulators. Accumulators used on Turrets
and Stockpickers. Includes: gauge, valve,
hose, adapter for nitrogen tank, carrying case
and manufacturer’s instructions.
Individual Items: Upper Seal (P.N. 300092)
Lower Seal (P.N. 300093)
Hose with Fittings - (P.N. 121422)
Manual Bleed Valve - (P.N. 300133)
Adapter for Accumulators on C-Series Trucks (P.N. 300138)
300138
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Part Number - 106465-001 and 106465-002
To couple replacement hose to existing hose
for ease of replacement.
Kit instructions - PF8075.
3/4"-16 fitting use P.N. 106465-001
9/16"-18 fitting use P.N. 106465-002
Spanner Tool
Part Number - 108641
Adjust hose take-up used on TS and TSP.
Lifting Bracket
Part Number - 151332
Used on RM6000 to lift out secondary lift
cylinder ram out of the cylinder without
removing the secondary cylinder assembly.
TOOLS
Hydraulic Pressure Gauge
Part Number - 104812
Used to check hydraulic systems pressure on
truck. Used on all Crown lift trucks except tow
tractors. Includes: gauge, hose (36") and fitting
(1/2" N.P.T.) for TS/TSP model trucks.
All other models of trucks require fitting and
connector listed below, not included with gauge.
Female fitting (P.N. 123321)
Connector (P.N. 064005-003)
High pressure gauge (P.N. 304812-001)
Velocity Fuse Tool
Part Number - 126400
For removal of velocity fuse in left hand
cylinder. Used on RR/RD5000/5200/5700
standard & S class trucks.
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Pressure Gauge
Piston Retainer Tool
Part Number - 300098
4000 PSI single gauge
0 to 4000 PSI
Quick Disconnect (P.N. 123321)
Used on RST50 & C5
Part Number - 816908
Used on PTH 50 Hydraulic Unit
(P.N. 816814-001) to keep spring down.
WARNING: Cancer - www.P65Warnings.ca.gov
Pin Tool
Coupler
Part Number - 123321
Used on 300098 and 104812
Works with nipple part numbers 123887
& 127214
123887
127214
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
1/2" Thin Wall Socket
Part Number - 104884
For removal and installation of relief valve seat
on J.S. Barnes pump and motor assemblies.
Used on PW, PE, PC, GPW, SP 3000 Series.
Part Number - 163409
Used to prevent the second stage mast
from moving during disassembly and
reassembling the mast sections. Makes
it easier to remove/install the third stage.
Used on TSP6000/6500/7000 with
TT mast only.
Pass-Thru Ratchet Set
(27 pieces)
Part Number - 360048
1/4" drive, pass-through, 6 point. SAE
sockets 5/32-9/16". Metric sockets 3.513mm. Includes 3" and 6" extensions. Used
on SC5700, SC6200 and FC5700.
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Tools 9.11
