Catalog - One Source (PF14434) - Flipbook - Page 344
Electrical Tools
Anderson Power Products
Auxiliary Contact Crimp Tool
Multi-Die Kit
Part Number - 340084-001
Crimps #6-20AWG SB, SBS, SBE, SBO,
Powerpole, Saf-D-Grid, and SPEC Pak
Connectors. Includes 3 dies and plastic case.
Molex (continued)
Crimping Tool
Image Not
Available
Extraction Tool
Part Number
Used on Crown Contacts
360040-002
062899-XXX
For removing pins from connectors. Used
on C5 engine harness connectors.
Cannon
Extraction Tool
Part Number - 100379
For removal of pins from the sensor assembly
connector. Used on trucks with Portec wire
guidance (Cannon style).
Packard
Crimping Tool
Part Number
Used on Crown Contacts
320051
062729-XXX
For crimping Packard pin and sleeve terminals.
Crimps terminals and seals in a single cycle.
Crimping Tool
Part Number
Used on Crown Contacts
118504
062589, 062588
Crimp terminals 062589 and 062590,
Cannon style.
Extraction Tool
Part Number
Used on Crown Contacts
320053
062729-XXX
For removing pins from Packard connectors.
Extraction Tool
TOOLS
Part Number
Used on Crown Contacts
360040-001
062899-XXX
For crimping terminals to wires. Used
on C5 engine harness terminals.
Crimping Tool
Part Number
Used on Crown Contacts
118505
062589, 062588
For removing pins on P.N. 062587 and
P.N. 062588. Cannon style connectors.
Part Number
Used on Crown Contacts
320052
062896-XXX
For crimping Packard Metri-pack 150 & 280
sealed 20-14 guage terminals. Core & insulation
wings are crimped in a separate motion.
Deutsch
Extraction Tool
Part Number
Used on Crown Contacts
320054
062896-XXX
For removing terminals in Packard Metri-pack
150 & 280 connectors.
Extraction Tool
Part Number
Used on Crown Contacts
062706
062704-XXX, 062797-XXX
Used to remove Deutsch pin and socket
contacts from DT and DTM connectors.
SB Extraction Tool
Crimping Tool
Part Number
Used on Crown Contacts
062737-002
062704-XXX, 062797-XXX
For stripping insulation and crimping new
terminals on light gauge electrical wire
for insertion into Deutsch DT and DTM
connectors.
Part Number
340089-001
340089-002
Amps
175
350
Weidmuller
Crimping Tool
Part Number
803452-003
Molex
Extraction Tool
Part Number
117615
Used on Crown Contacts
116858, 129761-XXX,
803450-XXX
For removing pins from mini fit connectors.
Used on GPW with Curtis 1207 transistor
controller and WP 2000 wiring harness handle.
Crimping Tool
Part Number
117636
Used on Crown Contacts
116858, 129761-XXX,
803450-XXX
For crimping mini fit terminals to wires. Used
on GPW with Curtis 1207 transistor controller.
Manufacturer’s instructions included.
9.20 Crown One Source
Used on Crown Contacts
803452-005, 803452-006,
803452-008
For stripping insulation and crimping
Weidmuller terminals.
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
