Catalog - One Source (PF14434) - Flipbook - Page 337
Drive Tools
Stud Alignment Tool
Gauge Pivot Stud
Part Number - 125097
Used on RR and RR 3000 Series trucks,
SP 3000 Series and TSP. Used to
install Drive Unit Steer Bearing and Stud Kit
(P.N. 125096). Kit Instructions - PF6947 and
PF6948
Part Number - 128463
Used to shim drive units on RR/RD 3000 and
5000 Series, SP 3000 Series, TS and TSP.
See kit instructions PF16487 & PF16762.
Individual Items:
Alignment Tool (P.N. 125093),
Drill Bushing (P.N. 125098),
Reamer (P.N. 125101)
Drive Wheel Hub Puller
Special Roll Tap
Drive Wheel Hub Puller
Part Number - 126105
Used to tap dowel pins on RR 5000 Series drive
unit. See TSB 378.
Part Number - 340079
Used to remove locking nut to replace drive axle
seal. Improved, deluxe model. Makes it easier
to remove hub and takes a lot less time than
using 141356. Used on RC 5500 & SC 5200.
Spanner Tool
Driver Nut Assembly
Part Number - 145194
Used to remove the threaded adjuster plate from
the back side of the RC 5500 & SC 5200 drive
unit. It is required for drive unit disassembly.
Part Number - 141357
Used with gear puller to remove wheel hub.
Used on RC 5500 & SC 5200.
See kit instructions PF16825.
Part Number - 141356
Used to remove locking nut to replace drive
axle seal. Used on RC 5500 & SC 5200.
See kit instructions PF16825.
Part Number - 091009
Aids in installing 2nd reduction gears inner
(and outer) oil seal on pre-3000 SP, Pallet,
Tow Tractors and Heavy-Duty Walkies.
TSB 152, Kit Instructions PF6445 included
with part. Includes: threaded sleeve, threaded
body, 2 piece handle, 3 locking bolts,
depth gauge.
Drive Unit Mount Tool
Part Number - 145509
Used to mount the RC 5500 & SC 5200
drive unit in a vice to hold it in position while
working on it.
Brush Retaining Tool
Accessory Items: Gauge (P.N. 091263)
Part Number - 803547-001
Used with Drive Motor (P.N. 803703).
Bearing Cup Tool
Part Number - 130675
Used to rebuild drive unit on FC 4000.
Retaining Ring Pliers
!
NEW
Part Number - 320078
For removal and installation of large retaining
rings. Used on pre-3000 series Stockpickers,
Pallet Trucks, Tow Tractors, and heavy-duty
Walkies. Tip replacement set P.N. 320079.
Drive Coupler
Part Number - 131348
For drive motor pinion locknut installation
of FC 4000.
Pilot Rods
Part Number - 141316
Used to align RC5500 traction motor. Need
quantity of 4.
Drive Unit Removal Tool
Part Number - 340332
Used to remove or install a PE, TR, PR or
30SP drive unit.
Drive Unit Mount Gauge
Part Number - 126383
Used to shim drive unit on RR 5000.
Kit Instructions - PF6998
Tools 9.13
TOOLS
Seal Installation Tool
