Catalog - One Source (PF14434) - Flipbook - Page 336
Hydraulic Tools
Oil Test Kit
1/4"-12 Point Socket
PartNumber
Number363515
- 3363515
hydraulic
andtmotor
oil.
z{z#o¢kyh|
spj #huk#
v{vy#vp
s5
Part
—È#[ lTests
Mail oil samples in for content test results. Comes with
container for oil, mailing container and labels.
Part Number - 104885
For disassembly and reassembly of
J.S. Barnes pumps and Charlyn torque
generators.
Test Kit Accessories
Hose Pulling Tool
Suction Pump
Part Number - 106465-001 and 106465-002
To couple replacement hose to existing hose
for ease of replacement.
Kit instructions - PF8075.
3/4"-16 fitting use P.N. 106465-001
9/16"-18 fitting use P.N. 106465-002
Part Number - 363515-001
Tubing, 100 Feet
Part Number - 363515-002
Accumulator Charging Tool
Part Number - 103623-004
For charging and testing bladder and
diaphragm type nitrogen charged
accumulators. Accumulators used on Turrets
and Stockpickers. Includes: gauge, valve,
hose, adapter for nitrogen tank, carrying case
and manufacturer’s instructions.
Individual Items:
Upper Seal (P.N. 300092)
Lower Seal (P.N. 300093)
Hose with Fittings - (P.N. 121422)
Manual Bleed Valve - (P.N. 300133)
Spanner Tool
Part Number - 108641
Adjust hose take-up used on TS and TSP.
Lifting Bracket
Part Number - 151332
Used on RM6000 to lift out secondary lift
cylinder ram out of the cylinder without
removing the secondary cylinder assembly.
TOOLS
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Hydraulic Pressure Gauge
Part Number - 104812
Used to check hydraulic systems pressure on
truck. Used on all Crown lift trucks except tow
tractors. Includes: gauge, hose (36") and fitting
(1/2" N.P.T.) for TS/TSP model trucks.
Velocity Fuse Tool
All other models of trucks require fitting and
connector listed below, not included with gauge.
Female fitting (P.N. 123321)
Connector (P.N. 064005-003)
High pressure gauge (P.N. 304812-001)
Part Number - 126400
For removal of velocity fuse in left hand
cylinder. Used on RR/RD5000/5200/5700
standard & S class trucks.
Pressure Gauge
Piston Retainer Tool
Part Number - 300098
4000 PSI single gauge
0 to 4000 PSI
Quick Disconnect (P.N. 123321)
Used on RST50 & C5
Part Number - 816908
Used on PTH 50 Hydraulic Unit
(P.N. 816814-001) to keep spring down.
Coupler
Pin Tool
Part Number - 123321
Used on 300098 and 104812
Works with nipple part numbers 123887
& 127214
123887
127214
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
1/2" Thin Wall Socket
Part Number - 104884
For removal and installation of relief valve seat
on J.S. Barnes pump and motor assemblies.
Used on PW, PE, PC, GPW, SP 3000 Series.
9.12 Crown One Source
Part Number - 163409
Used to prevent the second stage mast
from moving during disassembly and
reassembling the mast sections. Makes
it easier to remove/install the third stage.
Used on TSP6000/6500/7000 with
TT mast only.
!
NEW
Pass-Thru Ratchet Set
(27 pieces)
Part Number - 360048
1/4" drive, pass-through, 6 point. SAE
sockets 5/32-9/16". Metric sockets 3.513mm. Includes 3" and 6" extensions.
Used on SC5700, SC6200 and FC5700.
