Catalog - One Source (PF14434) - Flipbook - Page 329
Mechanical Tools
Continued
Personal Hand Truck
Handle and Gate Spanner Tool
Part Number - 322300-001
Part Number - 104712
For installation and removal of torsion springs
on control handles and platform gates.
Used on Pallet trucks, heavy-duty Walkies,
Stockpickers, and Tow Tractors.
Replacement pins: 061011-013
150 lb. load capacity. Opens and closes in
seconds. Extends to 39" tall. Compacts to
25" tall and 2.5" thick. 15" wide aluminum
base plate. 5" rubber wheels. No assembly
required. Weight: 7.2 lbs.
Personal Hand Truck
Part Number - 322300-002
200 lb. load capacity. Opens and closes in
seconds. Extends to 39" tall. Compacts to
28.5" tall and 2.5" thick. Extra wide 19.25"
aluminum base plate. Rugged 22mm steel
frame. 7" rubber wheels. No assembly
required. Weight: 10.5 lbs.
Spanner Wrench
Part Number - 104836
For removal, installation and adjustment of
Pallet Truck lift cylinder. Used on PW, PE, PC
and PR.
Shore A Durometer
Portable Vacuum - 1 Gallon
Part Number - 340111
Cord Length: 8 feet. Voltage 12V DC. Crevice
nozzle is great for tight spaces. Gulper nozzle
is great for large surfaces. Over 20 ft of reach.
Plug 12V power cord right into your car.
Part Number - 390223
Measures wheel and tire Shore A hardness.
Test range: 0-100 HA.
Ramp
Part Number - 340094-005
20" L x 7.25" W x 1" H. Ramp raises
Stockpicker power unit skirt high enough for
hydraulic jack to fit under the skirt. Truck should
then be properly blocked and secured.
Part Number - 363163
Helps users grease hard-to-reach areas on
mast channels. The 6-12 ft pro-pole provides
an extension for the chip brush to grease
desired areas. Kit includes: Pro-Pole, Brush
Holder, and 3" Straight Edge Chip Brush.
Part Number - 320040-001
Capacity 0-6". Rugged stainless steel body
and jaws. 4-way measurement: inside, outside,
depth and step. LCD display. Powered by one
silver oxide battery 1.55V, type SR44. Suitable
for machinists and toolmakers.
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Fork Wear Calipers
Part Number - 107330
Used to gauge minimum fork thickness and
maximum bore size.
Replacement Brush: P.N. 363163-003
Bahco F-Clamp
Part Number - 320076
One fixed and one sliding bracket fitted to a
galvanized profiled steel rail along with a plastic
covered, ball-swivel foot for easy clamping of
odd shapes. 16" overall length. 5" throat depth.
1200 lb. capacity.
Chain Wear Scale
Part Number - 106440
Used to check leaf and roller chain wear
used for lift and steering functions.
Chain Wear Gauge
Part Number - 306440
Strap and Hook
360044
Tuflex polyester SSEN60 x 1'6" round sling
with hook floating on the body.
Part No.
Description
360044
5300 lb Capacity Battery Cell
Extractor Strap w/Hook
360044-001 3000 lb Capacity Battery Cell
Extractor Strap w/Compact Hook
Measures chain from 3⁄8" up to 3" pitch chain.
Measures wear in % increments. Allows user
to track wear at each inspection. Limits visual
errors. Easy to follow instructions included.
Feeler Gauge Set
Part Number - 360059
Weldex 113 Plier
Part Number - 306442
Designed for a safe and easy removal of contacts
from SB or SBX connectors. Works on either 175
or 350; simply place the thin blade over the spring
and press while pulling the cable or contact.
Used to measure gap widths and adjust
governor gap. Includes (25) 1⁄2" x 3" blades
in sizes .0015" plus .002" to 0.25" in .001"
increments.
Hose Pinching Pliers
Part Number - 360041
Used to close off oil or coolant lines to prevent
fluid loss during repairs. Used on C5 trucks.
Tools 9.05
TOOLS
Mast Lubrication
Tool Kit
Digital Calipers
