Catalog - One Source (PF14434) - Flipbook - Page 321
Battery Tools
Continued
Adjustable Torquing
Screw Driver
Lead Sticks
Part Number - 300417-035 (35 - 1 lb sticks)
Made of 5 percent antimonial lead
Clean melting alloy, free of foreign
material, voids and porosity
Sticks are 12 inches long (30.5 cm)
and weigh 1lb (.45 kg)
Part Number - 360043-015
Torques from .5 - 4.5 Newton Meters /
50-450 Newton Centimeters. Used for servicing
V-Force HFM3 charger electrical connections.
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Long 1/4" Hex,
3mm Bit
Carbon Arc Burner
Part Number - 300440
Part Number - 360043-016
No Flame
Use voltage from battery to melt lead to
repair battery
Used for servicing V-Force HFM3 charger
electrical connections.
Accessories
Copper Coated Electrodes
Part Number - 300441-050
For use with Carbon Arc Burner
50 in a box
1/4" Drive Metric Hex
Bit Sockets
Part Number Description
360043-007
360043-008
360043-009
360043-010
360043-011
Hole Cutter
Annular Cutters - Hougen
Part Number - MSC98382922
Diameter: 15⁄16". Cutting depth: 1⁄2".
Precision ground to produce burr-free holes up
to 1⁄2" deep. Ideal for electrical, piping, conduit,
sheet metal & HVAC applications. High-speed
steel provides good wear resistance and can be
used in general purpose applications for both
ferrous and nonferrous materials.
Used for servicing V-Force Lithium Ion Batteries
with 1/4" Drive Socket Set P.N. 322000.
x
Hole Cutting Tool Arbor
Shank with Pilot Pin - Hougen
Part Number - MSC98380876
Minimum tool diameter compatibility: 13⁄16".
Maximum tool compatibility: 11⁄2". Shank
diameter: 1⁄2". No. of flats: 3. Material: Steel.
Weldon flat: No.
Straight shanks are used for general purpose
applications. The shank is smaller than the drill bit
diameter. They are used with portable drills and
drill presses on ferrous and nonferrous materials.
360061
These tools are designed to improve safety on
electrical jobs with UL classified non-conductive
composite.
• Exceeds all ISO and ASME strength and
performance requirements for standard steel
tools
• Individually tested to ensure protection up to
1000Volt AC and 1500 Volt DC
• UL Classified
• Lifetime warranty for material and workmanship
Part No.
Description
360061
Insulated Socket Set - Standard
Includes: Sockets 3/8", 7/16",
9/16", 5/8", 11/16", 3/4"; Ratchet
& Kit Bag
360062
Insulated Socket Set - Metric
Includes: Sockets 10mm, 13mm,
15-19mm, 22mm; Kit Bag
360062
Weldex 113 Plier
Part Number - 306442
Designed for the safe and easy removal of
contacts from the SB or SBX connectors
Works on either 175 or 350 Connectors
Brute Hammer Crimper
Part Number - 300465
Use with hammer, vise or press
Crimps 8 thru 4/0 guage connectors
Spring loaded pin locks in "up" position for
loading connector and cable. When released,
pin holds connector securely during crimping.
6-month warranty
1/4" Drive 2mm Hex Bit
1/4" Drive 2.5mm Hex Bit
1/4" Drive 3mm Hex Bit
1/4" Drive 4mm Hex Bit
1/4" Drive 5mm Hex Bit
360063
360064
Non-Conductive Screwdriver set
– Includes: Flat tip Screwdrivers
3/16", 1/4" 9/32"; Phillips
Screwdrivers #1, #2, #3
3/8" x 3" Extension
360065
3/8" x 6" Extension
360066
1/2" x 3/8" Adaptor
360067
Non-Conductive Needle Nose Pliers
360068
JHWR-24A Tool Pouch
360069
Torque Wrench 10Nm - 60Nm
360070
Battery Tool Bag for all of the
above parts
360063
360064
360065
360066
T-Handle with 10mm thread
Part Number - 352228
Used for removing V-Force lithium-ion model
V-LI1100 modules and V-Force lead-acid models
V-LA1120 and V-LA1130 lead-acid cells.
360067
360068
360069
360070
Battery and Charger 8.49
BAT
ATTTEER
RYY A
AN
ND
D C
CH
HA
AR
RG
GEER
R
B
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
