Catalog - One Source (PF14434) - Flipbook - Page 306
Injector System - Fill Options
Direct Fill Hose Injector
Part Number
300305
Vendor Number
INJ-DF
B AT T E R Y A N D C H A R G E R
Includes an in-line sediment filter, 18 feet
of high output industrial hose, a pressure
regulator and an Instant Valve Pro with built
in flow indicator (spinner),
Requires a plumbing connection to a 3/4"
NPT connection.
An isolation valve is recommended to be
installed at the source.
Use a Flow Checker to be sure the output
pressure is adequate for use with the
Water Injector System™.
This water supply is also compatible for
use with the Stealth Watering System™
and the Watering Gun
Additional adapters may be required
(see Optional Equipment box) below.
Optional Equipment
Note: The use of
Standard Connector
deionized water is
recommended for
all tanks.
Male Quick Connect to
Female Quick Connect
300227-026
Stealth Adapter
for Water Injector Supplies
300227-026A BFS
Adapter for Water
Injector Supplies
300227-026E BWT
Adapter for Water
Injector Supplies
300310-027
Flow-Checker
Water
Measurement Tool
Booster Pump
Part Number Vendor Number
300304
INJ-BP
Delivers 1.5 Gallons per minute
Automatically turns off when output pressure reaches 80 psi
Wall mountable and requires 110v A/C outlet
15 ft input hose
Used when the in-plant water pressure is not high enough to
completely fill a bladder tank. It cannot be used to fill the injector
system directly since it does not have a high enough flow rate.
Replacement parts:
Quick Connect Set, includes male quick connect x female hose
thread, female quick connect x female hose thread, & check
valve - P.N. 300227-023 (ACC-094)
Pump, 115 VAC, for INJ-BP, includes clamps & elbows P.N. 300304-001 (INJ-048)
8.34 Crown One Source
