Catalog - One Source (PF14434) - Flipbook - Page 304
Spider Injector System – Kits
AR
5-YE TY
N
A
R
WAR
Features
Very Fast Operation: An average industrial truck battery can be
Spider Injector System
B AT T E R Y A N D C H A R G E R
Part Number
300302-012
300302-018
300302-024
300309-012
300309-018
300309-024
Vendor Number
INJ-LP12
INJ-LP18
INJ-LP24
INJ-LP12D
INJ-LP18D
INJ-LP24D
Description
24V Spider Injector Kit Standard
36V Spider Injector Kit Standard
48V Spider Injector Kit Standard
24V Spider Injector Kit w/DIN adapter*
36V Spider Injector Kit w/DIN adapter*
48V Spider Injector Kit w/DIN adapter*
* Use on Douglas Batteries
Note: Tubing cutter 300227-007 and collar installation tool #300310-022 are
required for installation of the spider injector watering system.
Note: Prestrung options available upon request.
ATTENTION: Spider
Injector Watering Systems
require a minimum of 25
psi and maximum of 35
psi flowing water at a rate
of 8 gallons per minute.
If the flow is inadequate,
the Injectors will not shut
off. If a factory authorized
water supply is not being
used water pressure
from the wall must be
confirmed with a 300310-027 Water Flow Pressure Measurement Tool.
filled, with precise level control, in less than 15 seconds. The savings
in labor costs alone often pays for the system within its first year of
operation.
Quality of Watering: It extends the life of each expensive battery it
is installed on due to improved quality of watering. The battery is
properly watered every time.
Safety and Environmental Cleanliness: There is no need to peer
into cells to inspect levels as with manual filling. Spider Injector
Watering Systems automatically fill each cell to the correct level, so
no overfilling and no electrolyte overflow during charge.
Compact: A very low profile allows them to fit on almost any battery.
Spider Injectors can snap in and out to allow inspection of
electrolyte levels and specific gravities.
Rugged: Tough enough to survive impacts, abuse and extremes
of battery temperatures. There are no exposed parts to break off
even when a Spider Injector is removed from a cell. True level sensing
mechanism. Needs no submergence to sense level as a float does.
Can work right down to the top of the separators. Will not fail if it
touches cell components.
No-Freeze Tubing: The surplus water drains from the tubing into
cells after filling is complete. This allows the system to be used in
cold stores and other freezing environments.
2-Stage Filtration: In addition to the filter screen in the water tubing,
each Spider Injector has its own individual filter.
Easy Installation: Features flexible push tubing.
5-Year Warranty: Warrantable against defects in materials
and workmanship.
Spider Injector Watering System
P.N. 300302-006
Injector Spider Manifold
Inline 6-Port
(INJ-670)
P.N. 300227-006
1/4" Tubing (100 ft. roll)
(FLT-072)
P.N. 300310-018
Injector Tubing (500 ft.)
(INJ-495)
P.N. 300302-005
Injector Spider (Single)
(INJ-LP1)
P.N. 300310-023
Injector Collar (25 pack)
(INJ-690)
P.N. 300310-005
Quick Connect Coupling
(INJ-694)
8.32 Crown One Source
