Catalog - One Source (PF14434) - Flipbook - Page 30
Chemicals - Insulator
Silicone Dielectric
Electrical Insulating Compound
Part Number
063002-018
Part Number
063002-019
Sales Unit
Net wt 5.3 oz Tube
Sales Unit
Net wt 5.3 oz Tube
Contains silicone. Provides moisture barrier. -70° F
to 400° F. Applications: Electrical assemblies and
terminals, cable connectors, battery terminals, and
rubber and plastic o-rings.
Insulator and bushing flashover protection. Good
resistance against oxidation, moisture, and salt spray.
Chemicals - Heat Sink Compounds
Silicone Heat Sink Compound
Part Number
063002-029
Heat Sink Compound
Sales Unit
Net wt 5.0 oz Tube
Part Number
093983
Thermal coupling of electrical/electronic devices to
heat sinks. High thermal conductivity, low bleed,
stable at high temperatures. White grease-like silicone
heavily filled with heat-conductive metal oxides. Used
on Access II & III traction control modules.
Extra high-efficiency heat transfer compound.
Used on heat sink assemblies, SCR panels,
contactor panels and freezer heaters and limit
switch assembly.
SERVICE SUPPLIES
Chemicals - Sealants
Security Sealant
Primer
Part Number
061004-002
Part Number
065102-002
Sales Unit
Net wt 4.5 oz Can
Loctite 7471 Locquic Primer T - Increases cure speed
of Loctite anaerobic products. Especially recommended
for applications with passive metals or inert surfaces
and with large bond gaps. Use of activator is particularly
recommended for cure conditions below 15° C.
Primer
Part Number
061004-016
Sales Unit
Net wt 4.5 oz Can
Loctite 7649 Primer N - a solvent-based primer that features
very long on-part life. Use to speed the cure of all Loctite
Anaerobic Products and ensure proper cure on inactive
metals. Ideal for cure conditions below room temperature.
Liquid Gasket
Part
Number
061004-030
061004-015
Sales
Unit
Description
50 ml Loctite 518 (Gasket Eliminator300 ml preferred sealant for aluminum
flanges)
323018
50 ml Loctite 515 (Medium strength, for
323018-001 300 ml machined metal flanges and gaps up
to 0.25 mm; 30 minute fixture time)
Gasket Maker
Part Number
363007-001
Sales Unit
7 oz
363007-003
3 oz
Permatex 85224 Powerbead The Right Stuff
Instant Rubber Gasket Maker. The Right Stuff is
blowout resistant and outperforms pre-cut gaskets.
Protects against leaks caused by vibration and
thermal expansion. Temp Range -75°F to 450°F
continuous, 500°F intermittent and is Sensor-Safe.
Loctite Flange Sealant
Part Number
805044
Sales Unit
50 ml
Fast curing, provides resistance to low pressures
immediately after assembly of flanges.
1.26 Crown One Source
Sales Unit
1 oz
Seal Type
Sentry Seal
Used to visually detect any movement in the
adjustment of parts. Used on compression fittings,
studs, nuts, parts and assemblies after they have
been set to proper tension or position. Inspectors can
visually detect any movement or tampering.
Thread Locker
Part
Number
061004-019
061004-010
061004-026
061004-012
061004-020
061004-018
061004-028
Sales
Unit
0.5 ml
10 ml
0.5 ml
10 ml
10 ml
250 ml
20 g
323013
6 ml
Description
Loctite 271 high strength
Loctite 271 high strength
Loctite 242 medium strength
Loctite 242 medium strength
Loctite 222 low strength
Nuts’n bolts 420 low strength
Loctite 425 instant adhesive
- assure surface curing
Medium strength blue
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
Loctite Thread Sealant
Part
Sales
Number
Unit
061004-011 50 ml
Description
Loctite 569 - high
strength hydraulic
sealant
061004-023 50 ml Loctite 565 - PST pipe sealant
061004-029 250 ml Loctite 565 - PST pipe sealant
061004-014 10 ml Nuts’n bolts 431- fast cure,
penetrating, preassembled parts
Release Compound
Part Number
063002-033
Sales Unit
Net wt 5.3 oz Tube
Non-curing release agent. Applications: mold
release agent, mold break-in, release agent for
adhesives, release agent for plastic extruders,
lubricant for plastics and elastomers.
