Catalog - One Source (PF14434) - Flipbook - Page 295
Battery Watering Application Chart
Use the following table to help determine the best system for the application at hand. Not all applications are alike; be sure to put the appropriate
product into the correct application to ensure years of cost effective & reliable operation.
InjectorInjector
SystemSystem
Product
Watering Gun
Float System
Spider
Facility Size
1-5 batteries
5-25 batteries
25 or more batteries
Application
Light Duty
Small Facility
Infrequent Use
Golf Course
Medium Duty
Low Water Pressure
Medium Facility
Heavy Duty
Abusive Conditions
Rapid Charge
Battery Changers
Time to Install
Not Applicable
12 Minutes
3 Minutes
Time to Fill an 18-Cell Battery
Payback/ROI
20 Minutes
$
2-10 Minutes
$$
15 Seconds
$$$
V-Force® Barbed Watering Float System Kits
Continued
ed
V-Force Barbed Valve Battery Watering Float Systems make the watering of your industrial batteries faster and
safer. You will need two components: a water supply (found throughout the One Source Catalog) and one of the
part numbers found below. If you have a Philadelphia Scientific Water Supply, you can order a V-Force Float
System (e.g. 300316-012-INJ) to replace your
Voltage
CPC ¾" input Brands used
with Crown V-Force (most
common), Philadelphia
Scientific Stealth and FlowRite. Select a system below.
ow
CPC 1/2" input (used primarily
ow
with BWT (Battery Watering
Technologies).
Select a system below.
BFS input (used primarily
with BWT (Battery Watering
Technologies).
Select a system below.
Quick Connect Input Brands
used with are Philadelphia
Scientific Water Injector and
Water Injector Spider.
Select a system below.
12V
300316-006
300316-006-BWT
300316-006-BFS
300316-006-INJ
24V
300316-012
300316-012-BWT
300316-012-BFS
300316-012-INJ
36V
300316-018
300316-018-BWT
300316-018-BFS
300316-018-INJ
48V
300316-024
300316-024-BWT
300316-024-BFS
300316-024-INJ
72V
300316-036
300316-036-BWT
300316-036-BFS
300316-036-INJ
80V
300316-040
300316-040-BWT
300316-040-BFS
300316-040-INJ
Douglas Batteries (DIN vent openings): 24V-300316-012-01, 36V-300316-018-01, 48V-300316-024-01, 80V-300316-040-01
NOTE: Tubing cutter P.N. 3003227-allation tool and P.N. 300310-022 are helpful for installation of V-Force Float Watering Systems.
NOTE: V-Force watering kits installed from the factory on V-Force lead-acid bateries (Part# ending with -INS or -INP) use the same components as the kits above.
V-Force Barbed Watering Float Valve & System Components
V-Force Battery Watering System Components
®
Barbed Valve Option
300316-007
“One Size Fits All”
• Fills all cells to appropriate level
• Multiple float sizes not needed
Highly Visible Fill Level Indicator
Viewable from top and side
Lowest Profile
0.60" (15.2 mm)
Barbed Fittings
Clampless Barbed Fittings
make it easy to secure tubing
Rotatable Base
Once installed
Snap-Fit Base
No separate
adapter required
Barbed Watering Kit Cmponents
Component Part Number
300316-007
300316-002-XX
300316-001
300316-004
Component Description
V-Force Barbed Valve
V-Force Barbed Tubing
End Plugs For V-Force Barbed Watering
Std Barbed Input Assembly V-Force
Standard Watering Kit Components
Component Part Number
300225-001
300220-072-XX
300220-029
300220-083
Component Description
V-Force Float Assembly
V-Force Universal Tubing
End Plugs for V-Force Watering
Input Assembly V-Force
Additional Watering Kit Components
AR
5-YE TY
AN
WARR
Built-in Float Guard
Component Part Number
300227-015
300227-031
“One Size Fits All”
• Fills all cells to appr
300227-014
• Multiple float sizes not needed
300310-008
300310-018
Component Description
BFS Adapter
BWT Adapter
Flow-Rite Adapter
Injector Tubing - 1/2'' OD, 25'
Injector Tubing - 1/2'' OD, 500'
Battery and Charger 8.23
B AT T E R Y A N D C H A R G E R
The process is simple. First, identify the manufacturer of your water supply (e.g. Philadelphia Scientific, Battery
Filling Systems (BFS), Battery Watering Technologies (BWT), V-Force, or Flow Rite). Then, identify the battery
manufacturer; Douglas batteries will require a DIN adapter, which is included. Next, determine the battery voltage
(24V, 36V, 48V). The final step is to select the watering system from the table below. The adapters shown are
included so you can connect the kit you choose to your water supply.
