Catalog - One Source (PF14434) - Flipbook - Page 280
B AT T E R Y A N D C H A R G E R
Charger Accessories
Continued
Battery Monitoring
Identification Device (BMID)
Tool Balance Swivel Mount
Part Number - 396525-BTM
Part No.
300038-005
• Automatically programs
V-Force V-HFM/V-HFM3
chargers with the correct
battery charge profile.
• Dual profile configuration
to optimize battery health
and SOC for opportunity
or fast charging.
• Records all battery events
including temperature,
charge and discharge cycles.
• Current sensing up to
+/– 1300 amps.
• Electrolyte level sensor.
• Temperature probe senses
battery temperature
throughout the complete
charge cycle and adjusts the
charge profile as needed.
Min.-Max.
Load
3.0-5.0 lbs.
Reel
Weight
Cable
Length
1.5 lbs.
6'
The BD Series Tool Balancer is an economical
choice for balancing tools weighing up to 5 lbs.
The molded ABS housing has a smooth exterior
with rounded edges designed for maximum
ergonomic appeal. The tool balancer is easy to
adjust and reliable.
• Larger toroid to fit 4/0 cable.
• Rugged case construction
resists impact, water, and
battery electrolyte spills.
• Bluetooth® Class 1 for improved
range when connecting to a
laptop or tablet.
• UL Classified
• Installation kit included
(P.N. 396525-KIT)
Replacement parts:
Temperature Sensor - P.N. 396573;
Installation Kit - P.N. 396525-KIT
Tower Light
Part Number - 396586-001
• HFM3 LED light indicates battery
charge status from a distance.
• Includes 11.81 inch pole with
mounting bracket, I/O expansion
board with internal wiring loom,
expansion board mounting standoff
and DE9 mounting standoffs.
Mounting Hardware
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
The Mounting Bracket is a convenient solution for mounting charger
cabinets.
V-HFM3 Mounting Bracket
Part Number - 396583
• Heavy duty steel construction
supports up to 50 lbs.
396583
• Allows the FS3 charger cabinet to be
mounted from the rear, side or to stand.
• Included with every HFM3
model charger.
• Frees up floor space and keeps
charger secure to prevent damage.
Part Number - 396583-001
• Included with every HFM3
FS4/FS6 charger
396583-001
Remote Switch
Part No.
396587-001
396587-001
V-HFM and V-HFE Mounting Bracket
Part Number - 396521-001
Replacement parts for Part No. 396587-001:
Remote control only - P.N. 396587
Remote control cable - P.N. 396587-002
• Included with every HFM and HFE
FS3 Cabinet
396521-001
Description
Use with V-HFM3 chargers that
are mounted in a location not
easy to access.
Note: includes I/O Board, wiring harness and
mounting hardware.
396555
Use with V-HFM chargers that
are mounted in a location not
easy to access.
396555
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
V-HFM and V-HFM3 USB Cables
Long L-Bracket is used in conjunction with a pogo stick to keep
cables elevated and off the floor.
Part No.
300118
Part Number - 168283-001
• Use the longer L-bracket to mount
to the wall next to the FS3 size
cabinet charger.
• Can be used with both our standard
and heavy duty pogo sticks.
Also available:
300118-001
300118
300118-002
L-Bracket and Pogo Stick
P.N. 168176-001
L-Bracket with Heavy Duty Pogo Tender Kit
P.N. 168176-003
*Recommended for use with V-HFM3 FS3-3
models and larger.
300118-003
396592
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
L-Bracket includes hardware. Used to mount pogo stick to racking.
Part Number - 300460
396592
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
8.08 Crown One Source
Description
USB A to Mini-B 2.0 cable for
programming V-HFM Series High
Frequency Chargers with Laptop.
USB A to Micro-B 2.0 cable used
for laptops and Galaxy Tables S3,
S4 and S5.
Micro USB to USB A adaptor to
program V-HFM3 with tablet. This
is required for all tablets.
USB Type C to USB A cable
used for S6 and newer tablets.
V-HFM3 Accessory Cable, 3M
