Catalog - One Source (PF14434) - Flipbook - Page 244
Holders
Tab-Lock™ Kit for Large Tablets
Universal X-Grip® II Tablet Holder with
1.5" Ball for Small Tablets
Same as 351095-042 except locks for theft deterrent.
Cradle dimensions:
Height
Max. Width
8.00" - 10.25" 6.80"
8.25" - 10.25" 7.75"
Max. Edge Depth
0.50"
0.56"
Requires ball base adapter 157750.
Part No.
351095-043
Part No.
351095-046
Tab-Tite™ Kit for Small Tablets
WOR K AS S I ST®
Part No.
351095-040
Fits most 7-8" tablets. Includes 3 sets of
interchangeable cups to give the user a custom fit.
Spring loaded retention to hold device securely on
the forklift. It is compatible with the following tablets
with or without skins, sleeves or cases: Archos 7,
Asus EEE Pad Memo, Asus Tough-ETBW11AA,
Barnes & Nobel NOOKcolor, BlackBerry Playbook,
Dell Streak 7, HTC Flyer, Google Nexus 7, Samsung
Galaxy. Cradle is compatible with any tablet that will
fit the dimensions listed below. It is important to verify
the dimensions of your tablet with a case/sleeve/skin
when determining the overall size. Cradle dimensions:
Height
6.80" - 9.000"
7.00" - 9.100"
7.30" - 9.620"
Max. Width
5.31"
4.70"
5.31"
Note: Devices 2.25" in width must be a minimum of 7"
in height to fit.
No ball base adapter required.
Universal Laptop Mount Tough Tray II™
Spring loaded holder for large tablets, with or
without a case. Accommodates netbooks as well.
Dimensions:
Part No.
351095-044
Max. Edge Depth
0.125" - 0.56"
0.125" - 0.44"
1.06"
Part No.
351095-051
Same as 351095-040 except locks for theft deterrent.
Cradle dimensions:
Max. Width
5.31"
4.70"
5.31"
Tray
Tray Width
Side Clamp
Thickness (Expansion)
Arm Height
1.0"
8.56" - 11.12" 2.75" max
Universal Laptop Tough Tray™ Holder
with Flat Retaining Arm
Features:
1. Support cups contain open slots to fit tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Height
6.55" - 9.80"
6.75" - 9.90"
7.05" - 10.42"
Tray
Depth
6.0"
Requires ball base adapter 157750.
Requires ball base adapter 157750.
Tab-Lock™ Kit for Small Tablets
Four leg design has great holding power and does
not hide your tablet behind foam pads or plastic.
Spring loaded holder and 1.5" rubber ball connect to
the back of the base. Includes extra easy access grip
knobs located on the back of the holder for quick
release of your tablet. This holder expands and
contracts for perfect fit of most 7" tablets.
Min. Width
Max. Width
Depth
2.25"
5.75"
0.875"
Spring loaded expandable tray that accommodates 10
to 16 inch wide laptops. Includes four flat side clamping
arms that allow your laptop to close completely while
in the tray. These arms can be moved both vertically
and horizontally allowing for a custom fit for varying
thicknesses of laptops and the freedom of not blocking
ports or drives. Hole patterns on perimeter of tray
facilitate the mounting of additional RAM systems to
support GPS, PDAs or other electronics.
Tray
Depth
10.0"
Max. Edge Depth
0.125" - 0.56"
0.125" - 0.44"
1.06"
Tray
Thickness Side Clamp Arm Height
2.125"
0.5" to 1.75"
Requires ball base adapter 157750.
Part No.
351095-041
Keyboard Mount
Universal Portable Printer Cradle
Uses unique patent pending spring-loaded mechanism that holds strong,
yet provides easy removal for printer storage. At each end of cradles are
side clamping plates designed to fit cleanly around edges of a printer.
Clamping
Part No.
Dimensions
351095-054 6.625" - 10.5"
351095-055 5.625" - 9.5"
Max.
Height
2.5"
1.75"
Part No.
351095-057
This simple design clamps an 8” tube between
any RAM tablet cradle, and the Patent Pending
Roto-View™ round adapter plate allows for adjustment
to accommodate many tablet configurations, including
use in both landscape and portrait mode. The 8" tube
has a 1" ball on the end which connects to a standard
RAM double socket arm and Magnetic Power Plate III
for easy placement and removal of the keyboard.
Locking Knob - Locks the Arms
Includes a brass thread for 1" or 1.5" socket arms,
thus allowing you to disengage the screwing of the
knob. Once you have set your mount in the location
you need, you can lock it in place and feel safe that
your mounted device will stay right where you left it.
Part No.
351095-047
351095-048
6.12 Crown One Source
Thread Size
⁄4" - 20 thread
5
⁄16" - 18 thread
1
Works With
1" ball arm
1.5" ball arm
