Catalog - One Source (PF14434) - Flipbook - Page 243
Holders
Adapters
Round Base with Rubber Ball
Square Base with Rubber Ball
Consists of a rubber ball connected to a flat round
base. This mount has pre-drilled holes, including the
universal AMPS hole pattern.
Part No.
Description
351095-006 1" ball with 27⁄16" diameter base
157750
1.5" ball with 21⁄2" diameter base
351095-008 2.25" ball with 311⁄16" diameter base
351095-009 2.25" ball with 311⁄16" diameter base,
reinforced steel
Rubber ball, connected to a 3.625" square plate with
a 75x75mm VESA hole pattern. The rubber ball is
positioned 0.88" from the center of one edge.
Part No.
Description
351095-015 1.5" ball
351095-016 2.25" ball
Square Base with Rubber Ball
Consists of a 1" diameter rubber ball connected at right
angles to a 2.43" x 1.31" diamond base. The base
has 2 holes 1.912" from center to center, matches the
industry standard AMP's hole pattern and will connect
to a large variety of RAM mount and third party cradles.
Part No.
Description
351095-018
1" ball
Diamond Drill Down Base with
Rubber Ball
Rubber ball, connected to a 4.75" square plate with
4x100mm holes and 4x75mm holes in each corner.
Part No.
Description
351095-012 1.5" ball
351095-013 2.25" ball
351095-014 2.25" ball (reinforced steel)
Holders
Continued
X-Grip® Universal for 5" Phablets
Has a clean and clever four leg design that sports
great holding power without hiding your phone behind
foam pads and plastic. Dimensions: width - 1.875" 3.25", depth 0.875".
Has a clean and clever four leg design that sports
great holding power without hiding your phone or
phablet behind foam pads and plastic. Compatible
and interchangeable with a wide range of mounts.
Dimensions: width 1.75"-4.5".
No ball base adapter required.
Part No.
Description
351095-035
1" ball
No ball base adapter required.
Part No.
351095-034
Description
1" ball
Tough-Claw™ with X-Grip® Holder
Universal Finger-Grip™ Phone/Radio
Holder
Tough-Claw™ base and universal X-Grip® holder. The
X-Grip® holder has a clean and clever four-leg design
that sports great holding power without hiding your
smartphone behind foam pads and plastic.
Part No.
351095-052
Power-Grip™ Universal Scanner
Gun Cradle
Compatible with a wide range of ruggedized 2D
barcode scanners. Accommodates pistol grip scanner
guns with a maximum pistol grip of 1.4". Internal
dimensions 3.47" x 2.16" x 4.9".
Part No.
351095-037
Part No.
351095-036
Requires ball base adapter 157750.
RAM-X-Grip® III Universal Clamping
Cradle for 10" Tablets
Requires ball base
adapter 157750.
Spring loaded holder for large tablets, with or
without a case. Accommodates netbooks as well.
Dimensions:
Part No.
351095-045
Tray
Tray
Depth Thickness
6.0"
1.0"
Tray Width
Side Clamp
(Expansion)
Arm Height
8.56" - 11.12" 2.75" max
Requires ball base adapter 157750.
Tab-Tite™ Kit for Large Tablets
Universal Holder for Scanner Guns
and Handheld Computers
Fits most 10" tablets. Includes 2 sets of interchangeable
cups to give the user a custom fit. Spring loaded. Cradle
dimensions:
Height
Max. Width Max. Edge Depth
8.50" - 10.75" 7.75"
0.56"
8.75" - 10.75" 8.25"
1.10"
Specially designed cradle that will hold most types
of gun scanner handles. On the side of the cradle is
a spring loaded lever that will securely hold the gun
scanner in the cradle. Designed for pistol grip scanners.
Requires ball base adapter 157750.
Part No.
351095-039
Designed to hold a large amount of cell phones &
electronic devices — comes with 3 sets of 4 flexible
rubber coated fingers placed along sides to grip your
device. Fingers open by squeezing ends to open small
finger arms. Bottom of the holder includes back plate
that adds support to the device being held by the mount.
Spine plate contains universal AMPs and 1.5" x 2" hole
patterns. Min/Max with top & bottom plates: Height
5.25" to 6". Plates can be removed for larger devices.
Requires ball base adapter 157750.
Part No.
351095-042
Work Assist 6.11
WOR K AS S I ST®
X-Grip® Universal Holder
